- Joined
- 7 Oct 2016
- Messages
- 1
- Reaction score
- 0
- Country
Hi,
Looking to install a danfoss rx1 receiver to Worcester Boiler 24i RSF.
Boiler has wires going from mechanical clock to 3 terminals CN CI and CL
There are 3 terminals to the right of this which are RN RI and RL. There is a link between RI RL.
I have disconnected the clock, removed the link from RI and RL and placed it on CI and CL.
I have now ran L and N spur from the boiler to L N on the RX1.
Danfoss RX1 has 4 more terminals
1, 2 (common) 3 (on) and 4 (off)
My question is
What terminal on the boiler connect to the correct terminal on the Danfoss.
Any suggestions would be appreciated.
Looking to install a danfoss rx1 receiver to Worcester Boiler 24i RSF.
Boiler has wires going from mechanical clock to 3 terminals CN CI and CL
There are 3 terminals to the right of this which are RN RI and RL. There is a link between RI RL.
I have disconnected the clock, removed the link from RI and RL and placed it on CI and CL.
I have now ran L and N spur from the boiler to L N on the RX1.
Danfoss RX1 has 4 more terminals
1, 2 (common) 3 (on) and 4 (off)
My question is
What terminal on the boiler connect to the correct terminal on the Danfoss.
Any suggestions would be appreciated.