really nice job bet your pleased 
on mine i have made an mdf throat plate and slowly wound the blade through so full support and no gap to aid splintering and stop small /thin bits getting dragged by the blade iff you have the riving knife fitted you need elongate the slot before installing the knife
and if you let the sawdust build up eventually you wont get the saw blade below the surface as the sawdust will just get compressed under the drop mechanism although it will take many 10s off hours
on mine i have made an mdf throat plate and slowly wound the blade through so full support and no gap to aid splintering and stop small /thin bits getting dragged by the blade iff you have the riving knife fitted you need elongate the slot before installing the knife
and if you let the sawdust build up eventually you wont get the saw blade below the surface as the sawdust will just get compressed under the drop mechanism although it will take many 10s off hours
Last edited:
