Diamond Core drill

[Elsa TLC]

Followed the link to look at the reviews but there are no reviews showing for that product. Have they been deleted or is it just for me?

That's the 110 volt. The reviews are for the 240 volt version of the same drill.

 

[Elsa TLC]

Marcrist DDM150-1S Diamond Core Drill 110V Hand-Held

Dry core drilling in concrete, brick and masonry, hand-held only. Supplied with a BSP adaptor, drift key, spanner, side handle and carry case.

www.mytoolexpert.co.uk

This looks a good tool . Anything that saves wear and tear of my body is worth the extra money.

 

[Exedon]

One of my sub contractors had the bosch clutch failed he had 8 weeks off work.
I personally wouldn't have any core drill that relies on a chuck.
The ones with a direct screw mount far better.

 

[opps]

Followed the link to look at the reviews but there are no reviews showing for that product. Have they been deleted or is it just for me?

https://www.screwfix.com/p/bosch-gsb-162-2-re-1500w-electric-impact-diamond-core-drill-240v/130pv

Most of the reviews say that the safety chuck doesn't kick in.

 

[opps]

Marcrist DDM150-1S Diamond Core Drill 110V Hand-Held

Dry core drilling in concrete, brick and masonry, hand-held only. Supplied with a BSP adaptor, drift key, spanner, side handle and carry case.

www.mytoolexpert.co.uk

This looks a good tool . Anything that saves wear and tear of my body is worth the extra money.

I does look good but when the video says not to use slotted core bits, is that only the case when using the (expensive) dust extraction attachment? I watched the video with the volume turned down. That said, the dust extraction does look impressive.

 

[Elsa TLC]

I does look good but when the video says not to use slotted core bits, is that only the case when using the (expensive) dust extraction attachment? I watched the video with the volume turned down. That said, the dust extraction does look impressive.

Problem I'm not cutting enough holes to warrant Drill, extraction & new unsloted bits

 

[blup]

I got the Makita hp2071 for core drilling, very impressive, clutch doesn't kick in too early. Wasn't sure about the keyless chuck but it hasn't slipped under load.

 

[Elsa TLC]

I got the Makita hp2071 for core drilling, very impressive, clutch doesn't kick in too early. Wasn't sure about the keyless chuck but it hasn't slipped under load.

I think this is what I have now. It's lost it guts but it has been a good drill.

I may well go buy another. I fancy a change but better the devil & i haven't the stomach to pay out £500+.

 

[opps]

I think this is what I have now. It's lost it guts but it has been a good drill.

I may well go buy another. I fancy a change but better the devil & i haven't the stomach to pay out £500+.

Have you considered having it repaired? It might be something as simple as the armature or the field housing

see item 44 (£13) or item 38 (£29.99)

 

[Elsa TLC]

Have you considered having it repaired? It might be something as simple as the armature or the field housing

see item 44 (£13) or item 38 (£29.99)

As the old saying goes.......on the whole it doesn't owe me anything. It's 10 + years old, and it's got me out of a hole or two in the past.

 

[Elsa TLC]

I went to ITS this morning with the view to spending £575.00 on the top most powerful Makita.

However it was alot bigger and heavier.

So I went for the £287.00 lesser model.
It's what I had before.

I only had a 1½ hole through brick but it was smooth and effortless. Far better than the Dewalt that's roughly the same price.

The bigger test will be 127mm. But the 1½ the clutch worked as I could of only hoped.

Watch for more comment but so far I would recommend for price and performance.

 

[ATTQ]

So I went for the £287.00 lesser model.
It's what I had before.

I've got the same and was about to recommend it. Still made in Japan and you can feel the quality. I got a used makita wall chaser the other day. Made in 2019 IN ENGLAND! What time warp did that come out of i wonder.

 

[ATTQ]

Have you considered having it repaired? It might be something as simple as the armature or the field housing

see item 44 (£13) or item 38 (£29.99)

or just clean and put new brushes in

 

[Elsa TLC]

I've got the same and was about to recommend it. Still made in Japan and you can feel the quality. I got a used makita wall chaser the other day. Made in 2019 IN ENGLAND! What time warp did that come out of i wonder.

Is the chaser any good?

 

[Elsa TLC]

Have you considered having it repaired? It might be something as simple as the armature or the field housing

see item 44 (£13) or item 38 (£29.99)

or just clean and put new brushes in

I compared the two side by side. The old one has just lost its guts.