Depending on the size of the rad and the heat loss from the hall, you could set it at say 15°C and let the TRVs (or throttle valves if you don't have TRVs) control the temperature in other rooms. But as others have said, it doesn't have to be in the hall.What has post 2 got to do with it? Unless your sitting in your hall or have to sit in the coldest room of your house there is absolute no sense in putting it in that space

Was he a very old plumber?A plumber told me to put my wireless thermostat in the coldest area of my house which would be my hall. How does this make sense? It will just come on more often and waste gas


Well set it lower then .....like 16, 17 or 18C. If the rest of the house is normally warmer than the hall then those parts will continue to be warmer than this when the hall thermostat shuts off. You just need to experiment with the setting to get the house to the temperatures you are comfortable with21 degrees
Horses for courses. That way works for me. I have it in the kitchen, (away from the oven and hob) which has 2 outside walls and large window so the coldest room.A plumber told me to put my wireless thermostat in the coldest area of my house which would be my hall. How does this make sense? It will just come on more often and waste gas

Good advice, in the main it works, where it fails is if the room you use most cools down too slowly, one can adjust heat up speed with the lock shield valve, but no way to adjust cool down speed.Put the thermostat in the room you use most, and adjust the lockshield so that it warms up slower than the other rooms.

tried to show one how to place radiators and thermostats so they are in the thermal flow, and when one thinks about it the TRV at the bottom and to one side of the radiator should be in a very good position to monitor the return air, so keep the room as a whole at the temperature required.
it may well work, but I could not predict the flow of air in a room very well, once we leave the walls, in the main, we only need a wall thermostat when the radiator is against a cold wall, this
it does not need to be just one thermostat, top is the wall thermostat and bottom is the TRV head. Also
I have a Nest Gen 3 in my hall, so any of the three can fire the boiler, the rooms will not over heat, as all TRV heads are programmable and have been set to what we went each room to heat to, the Nest is really a left over, from a system which did not work, hall cools too slowly, but it can also control domestic hot water, so left in place. It also means should the batteries become discharged on the Wiser, we have a second string to our bow.Get a remote oneI dont need the hall heated tho and i told him that but but he said its always put in the cold area. Basically tried to make me look stupid. Saying i thinkni know what i am tallking about it is my job.

Is that a remote plumber? Seems like one trained in the 60s and has never caught up with modern systems.Get a remote one
here in the UK engineer does not mean he drive a steam train, it means they have a degree.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local