- Joined
- 11 Jan 2004
- Messages
- 170
- Reaction score
- 4
- Country
Hello,
I have a shipping container that I use as a workshop. I based it on solid 1m3 concrete blocks on each corner for extra stability. Up to about a month ago the door closed fine but now it won't and there is a wider gap at bottom on opposite side of hinges than at the top. Basically it seems about 1cm out of line from top to bottom. I have tried jacking the left side of container up thinking that might right this but no luck.
Does anyone out there have any ideas or experience in this please ?
I am attaching some photos..The second photo shows top of door with no gap and the third photo shows the bottom of door with a gap.
Thanks
I have a shipping container that I use as a workshop. I based it on solid 1m3 concrete blocks on each corner for extra stability. Up to about a month ago the door closed fine but now it won't and there is a wider gap at bottom on opposite side of hinges than at the top. Basically it seems about 1cm out of line from top to bottom. I have tried jacking the left side of container up thinking that might right this but no luck.
Does anyone out there have any ideas or experience in this please ?
I am attaching some photos..The second photo shows top of door with no gap and the third photo shows the bottom of door with a gap.
Thanks