-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Downstairs lights not working
- Thread starter NPC
- Start date
check there isn't a separate rcd switch somewhere that needs resetting.
have you reset the mcb correctly? some need to be pushed right down then pushed up.
have you removed the blown lamp?
have you reset the mcb correctly? some need to be pushed right down then pushed up.
have you removed the blown lamp?
The MCB could have failed. What make is it?
Martin
Martin
I had an intermittent mcb a proteus board the other day.
That was;- you turn it on, one time and it worked, try it again - and it did not. You could try toggling the mcb switch a couple of times. Other than that I would not advise you do any further testing in this area yourself.
Too dangerous in there for some one with limited experience. Especially the board that you have - there are huge live busbars running all over the place in them.
But you should remove the old bulb in any case.
Martin
That was;- you turn it on, one time and it worked, try it again - and it did not. You could try toggling the mcb switch a couple of times. Other than that I would not advise you do any further testing in this area yourself.
Too dangerous in there for some one with limited experience. Especially the board that you have - there are huge live busbars running all over the place in them.
But you should remove the old bulb in any case.
Martin
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
