Need to drill through ceramic tiles. How difficult is this?
We've got a drill, masking tape and a 8mm tile drill bit.
We've got a drill, masking tape and a 8mm tile drill bit.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Drilling Tiles
- Thread starter spiidey
- Start date
Ideally a tile bit, but masonry will do. Don't use the hammer action.
Measure up, place tape in location of hole, then mark the tape for hole, the tape will help the bit from slipping and scratching tiles.
Low speed on rotary action, be patient, once you are through tile and if the wall behind is masonry, you can then but into hammer action, if using tile bit, change to masonry bit when through tile for holing wall.
Measure up, place tape in location of hole, then mark the tape for hole, the tape will help the bit from slipping and scratching tiles.
Low speed on rotary action, be patient, once you are through tile and if the wall behind is masonry, you can then but into hammer action, if using tile bit, change to masonry bit when through tile for holing wall.
Thank you!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
