-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
E119 Water Pressure fault on a Baxi
- Thread starter thomo27
- Start date
- Joined
- 24 Nov 2005
- Messages
- 685
- Reaction score
- 98
- Country
See F & Q`s. Number 6
, and I thought the posters on the electrical forum were good.I know this is a very old topic, but I also had this problem today.
The problem was low pressure, which was solved by topping up the boiler. My concern is, why has the pressure dropped so much?
It was at approx 1.5 bar and dropped to around 0.25 bar. I have also noticed that now I have topped it up, once the heating comes on the indicator drops down from 1.5 to 1. Is this correct?
Thank you for any help.
The problem was low pressure, which was solved by topping up the boiler. My concern is, why has the pressure dropped so much?
It was at approx 1.5 bar and dropped to around 0.25 bar. I have also noticed that now I have topped it up, once the heating comes on the indicator drops down from 1.5 to 1. Is this correct?
Thank you for any help.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
