I am having a 32A outside circuit fitted from my consumer unit to power a hottub. The cable is 6mm armoured, and about 40M in length.
1. Is there any IEE Regs requirement to use an earth spike anywhere in this circuit. If not, why do you think the hottub supplier may have recommended that I fit one.
2. Should my sparky be fitting 2 core or three core cable (it is a standard single phase 230v circuit)
Thanks.
1. Is there any IEE Regs requirement to use an earth spike anywhere in this circuit. If not, why do you think the hottub supplier may have recommended that I fit one.
2. Should my sparky be fitting 2 core or three core cable (it is a standard single phase 230v circuit)
Thanks.