Easi fill or Multi Purpose

[dc110770]

I have taken down 4 wall lights from my lounge / dinning room.

I have disconnected the supply and filled to holes with polyfiller. To get a nice smooth finish I am thinking about using easifill. Might have a go at multi purpose plaster. The holes are not very big so any suggestions?

Many thanks,

Daniel

 

[Richard C]

Easy fill & some sandpaper; you will have big problems trying to blend in using Multi-finish, it's really only a job for the experienced.

 

[trowelmonkey1]

with you all the way rich! easifill way more suitable to this job.

 

[1john]

if any of the holes are deep I find that it is best to bulk them up with one coat plaster (which also sands easy when dry) and the a coat or two of easyfil with sanding between should leave a flawless finish.