Edging on Blocking Paving Path

Joined
2 Apr 2026
Messages
4
Reaction score
0
Country
United Kingdom
Hello,

I have a block paving path in the back garden where over the last 10+ years the edge has gradually fallen away and I'm looking for some advice on how to repair it.

I'm thinking to remove the cracked concrete and 'kerbing' and build something stronger, but the how and what with is where I'm looking for suggestions. Any help would be appreciated.

1000008583.jpg


1000008587.jpg

1000008589.jpg


1000008585.jpg
 
Is the path sloping down away from the edging or is it an optical illusioun in your pics. Either way it looks like you have problems on both sides and it looks like it hasn't been laid very well especially when it has probably only had foot traffic. I think the only lasting solution would be to take it all up and start again
 
Look like lawn drying has shrunk soil away causing base to subside and fail , base probably not substantial enough for edge blocks . The lawn level is too low , should be covering cement .
 
dig it out and relay it properly, use a 6" deep edge (i'm guessin its 4" whats in)
I know it sounds like a big job but probably not that bad to do

in the spirit of always going way over the top, I made mine a double !

1788807605385.png
 
it was to create a nice transition from grass to paviours unbelievably weeds still come out of the gravel - my concrete base and washed gravel were to guarantee no weeds, EVER

1788853462392.png
 
Weeds will always find a way: i've reconsidered how much and where to use it in the garden. The thin stuff is a waste of space and money. Heavy duty plastic works but looks bloody awful in garden 'burbs.
 
Weeds will always find a way: i've reconsidered how much and where to use it in the garden. The thin stuff is a waste of space and money. Heavy duty plastic works but looks bloody awful in garden 'burbs.
Unfortunately some seeds don't need soil to germinate. Fortunately they don't usually thrive after germination and putting a little growth on.
They are rather unsightly until they die off though.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top