Hi,
Need to replace light in kitchen, picture of wiring from old light below.
Old light had an earth wire rather than the fixed metal prong on new light. Wiring from old light was connected to terminal strip which was then pushed up into hole in ceiling.
To save trying to cram all wires into terminal on new light can I simply use a short piece of 1/1.5mm twin and earth from existing terminal into terminal on new light?
Pictures of existing wiring and new light attached.
Cheers
George
Need to replace light in kitchen, picture of wiring from old light below.
Old light had an earth wire rather than the fixed metal prong on new light. Wiring from old light was connected to terminal strip which was then pushed up into hole in ceiling.
To save trying to cram all wires into terminal on new light can I simply use a short piece of 1/1.5mm twin and earth from existing terminal into terminal on new light?
Pictures of existing wiring and new light attached.
Cheers
George