Extending sockets through 50mm thermal insulation boards

[ColJack]

If you want advice on rearing toddlers, cooking, motherhood etc I will be more than happy to assist!!

Why wont my 7 month old son sleep all night, why can I no longer function until ten AM and why cant i get to sleep at night, all this has started since the new addition.

you have to ask like they do..

I'll edit it for you..

Why can I no longer function until ten AM and why cant i get to sleep at night?

and then on the 3rd page you add the bit about it starting 7 months ago, about the time you got the newborn..

 

[Pookey]

The boards are ballytherm 50mm and 9mm plasterboard. Have ordered some extension rings and picked up foil tape too. Got 30amp terminal blocks as couldn't get a crimping tool in diy shop but may get one off line. Thank you for your advice. I will be moving sockets to get additional slack in rooms that haven't been done - unless wall proves too difficult to chiisel out which may be the case with the stone.

The boards have foil between foam and plaster for vapour.

 

[bongos]

The crimper you will require will look like this. Around £12. Do not get an automotive crimper.

Assuming the circuit is wired in 2.5mm² t+e then you will require blue crimps for the line/neutral and red for the earth. Do not use automotive crimps.