I'm fitting a plastic ceiling to my bathroom and was wanting to fit a 35w shower fan light and 3 x 35w halogen down lights to the ceiling, how do you go about this so it doesn't discolour or damage the ceiling?
the ceiling instructions say leave a 10mm gap between the halogen bulb or shroud and the panels. I haven't yet bought the lights so don't know if you can do this or not, is there anything you can buy or heat spacers you can fit? the panels are 10mm thick but hollow inbetween.
the ceiling instructions say leave a 10mm gap between the halogen bulb or shroud and the panels. I haven't yet bought the lights so don't know if you can do this or not, is there anything you can buy or heat spacers you can fit? the panels are 10mm thick but hollow inbetween.