The tils floor (concrete base) of my conservatory has sunk slightly at the point where it joins the house by a double patio door. There is a gap of approx 20 mm along the width of 12'. Without relaying the whole floor what would be the best way to rectify things
FLOOR MOVEMENT
- Thread starter redvet8
- Start date
red - is it a vertical or horizontal gap of 20mm? Assuming you've fixed the movement problem then cover the gap with something to match the patio doors. PVC moulding for a plastic door, hardwood strip/moulding to match the timber doors.
Tks for response. Its a horizontal gap. Some 10 years ago there was a problem with the lounge floor which was bitumen, we had Structural consultants in to check it out and finished up with new floor and that problem was resolved and we should really have had the conservatory floor done at the same time. I had thought about PVC which would match patio doors and have looked for something at DIY but still searching. Probably best bet would be local glass company who do PVC conservatories, they might let me have some strips to do the job.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local