- Joined
- 8 Feb 2021
- Messages
- 6
- Reaction score
- 0
- Country
Hi all.
We are currently in the process of trying to remove 800x800 porcelain tiles from our open plan kitchen.
The tile are coming up no problem but it's leaving a lot of adhesive behind.
Our plan we to uplift the tiles, which are laid on 20mm EPS150 Wet UFH system, 20mm T&G and 12mm ply.
The adhesive is sticking to the ply, also the ply and OSB are stuck together with screws and possibly adhesive.
Ideally I want to get back to down the insulation and
UFH pipes and pump a screed sub floor back in removing the floating floor system.
What would people opinions be about best approaching this?! We've started in the ultiity and haven't been able to uplift a section of the sub floor yet.
We are currently in the process of trying to remove 800x800 porcelain tiles from our open plan kitchen.
The tile are coming up no problem but it's leaving a lot of adhesive behind.
Our plan we to uplift the tiles, which are laid on 20mm EPS150 Wet UFH system, 20mm T&G and 12mm ply.
The adhesive is sticking to the ply, also the ply and OSB are stuck together with screws and possibly adhesive.
Ideally I want to get back to down the insulation and
UFH pipes and pump a screed sub floor back in removing the floating floor system.
What would people opinions be about best approaching this?! We've started in the ultiity and haven't been able to uplift a section of the sub floor yet.
