Ford Fiesta MK6 (2007) Help identifying this cable please

[James Robson]

Hi all,

I have just changed the starter motor on my Fiesta MK6 and whilst removing the old one, this cable came off. There is only a limited amount of movement as its housed in a cable tidy with little stretch. I've had a good look round above and below the engine but I can't see anywhere obvious it may have come from. Please can you help identify it?

Thanks.

J.

 

[Burnerman]

It’s the sort of connector that pushes onto an oil pressure or water temperature sensor.....often these things have a screw thread which grips the connector there.
Nothing like that in the vicinity?
John

 

[HERTS P&D]

Start the engine and see if any lights stay on or come on, or even any gauges that don't work.
Andy

 

[James Robson]

Thanks for your replies. I found the location just behind the oil filter so I was happy to get it reconnected. Thanks again!