Kerosene has recently started leaking out of my RDB1 50/70 SH Burner.
Closer examination shows it is seeping from the stem valve (which the solenoid fits over) on the fuel pump. I've made sure the stem value to tightly screwed in but the fuel is still seeping out. Would the best course of action to be replace the stem valve or might it just need the o-ring replacing where the stem value screws into the fuel pump.
Any advice would be much appreciated.
Cheers
Andy
Closer examination shows it is seeping from the stem valve (which the solenoid fits over) on the fuel pump. I've made sure the stem value to tightly screwed in but the fuel is still seeping out. Would the best course of action to be replace the stem valve or might it just need the o-ring replacing where the stem value screws into the fuel pump.
Any advice would be much appreciated.
Cheers
Andy