I am installing 2 single sockets in the garden and some garden lighting. The length of run from the house C.U to the furthest socket is 80 mtrs. Biggest output on this socket 2.7kw,jet washer. Lighting is being tapped to a radio receiver,output only 1000 watts tops.Main supply coming from main C.U is going to be 16A feeding a 2 way C.U. 16a for sockets and 6a for lights. What would be the best size cable for this installation taking into account the length of run and demand.
garden lights and sockets
- Thread starter lebowski
- Start date
Sponsored Links
I don't mean to sound rude but do you think you are up to doing this work safely? There are laws regarding installing this type of "Special Installation", please read here //wiki.diynot.com/electrics:part_p
- Joined
- 11 Jan 2004
- Messages
- 42,759
- Reaction score
- 2,641
- Country
First of all, there is no discrimination in your circuit.
Second, your lighting (1000W) does not leave much room for any expansion.
6mm gives you a volt drop of 9.34V, which is too close for me. I'd suggest 10mm2 SWA, but as Spark says, your ideas so far suggest you need to gain more knowledge before attempting such work, especially given this is notifiable.
Second, your lighting (1000W) does not leave much room for any expansion.
6mm gives you a volt drop of 9.34V, which is too close for me. I'd suggest 10mm2 SWA, but as Spark says, your ideas so far suggest you need to gain more knowledge before attempting such work, especially given this is notifiable.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
