Hi guys,
Had some close board fencing fitted, along with a very big gate. It's about 4 meters long, with a metal frame, and metal post, now over boarded both sides with close board fencing.
The guy who made the gate, fitted the post, it's about 2 foot under ground, with two barrow loads of concrete.
The problem is, due to the weight, the post is now leaning, and the gate scrapes on the ground.
The guy has been back to have a look, and is trying to think of a plan, he's talking about hammering a metal post to the right, taking the gate off, straitening the post up, pouring in some very running cement, and trying to stick it back to where it should be, any other ideas or comments greatly appreciated, thanks, Paul
Had some close board fencing fitted, along with a very big gate. It's about 4 meters long, with a metal frame, and metal post, now over boarded both sides with close board fencing.
The guy who made the gate, fitted the post, it's about 2 foot under ground, with two barrow loads of concrete.
The problem is, due to the weight, the post is now leaning, and the gate scrapes on the ground.
The guy has been back to have a look, and is trying to think of a plan, he's talking about hammering a metal post to the right, taking the gate off, straitening the post up, pouring in some very running cement, and trying to stick it back to where it should be, any other ideas or comments greatly appreciated, thanks, Paul