- Joined
- 3 Jan 2011
- Messages
- 7
- Reaction score
- 0
- Country
Hi, sorry if this topic as been covered a million times before but I haven't found any definite answer on searches?
The water remains luke warm or cold most of the time, the hot water tap as to be run for about 5 minutes before anything like warm water comes through. The burner does not cut in when a hotwater tap is opened, I have removed the diverter valve micro switch and the pushrod is moving by 11mm when hot tap opened. The diverter valve m/switch switches on the pump but does not fire up the boiler. Any suggestions would be much appreciated.
The water remains luke warm or cold most of the time, the hot water tap as to be run for about 5 minutes before anything like warm water comes through. The burner does not cut in when a hotwater tap is opened, I have removed the diverter valve micro switch and the pushrod is moving by 11mm when hot tap opened. The diverter valve m/switch switches on the pump but does not fire up the boiler. Any suggestions would be much appreciated.