Grant Vortex 26e low pressure
- Thread starter MickyP10
- Start date
Have a look through the fault finding sequence and location of switch.
Grant register installer here.
Simple answer link pressure swith out they haven't been fitted to new Grant combi's for several years.
We remove them every time we find them mostly because when your working on boiler they are renown for snapping off!
From memory the pressure switch connections are 15 and 16 on board just take out pressure switch connections and insert link.
If that don't do it it's the board.
Simple answer link pressure swith out they haven't been fitted to new Grant combi's for several years.
We remove them every time we find them mostly because when your working on boiler they are renown for snapping off!
From memory the pressure switch connections are 15 and 16 on board just take out pressure switch connections and insert link.
If that don't do it it's the board.
Absolutely take wires out of board replace with link
If you do any work on system and have to drain or even just get rid of pressure that's time to remove switch.
It's threaded 1/4 bsp so you just need a 1/4 plug.
If you do any work on system and have to drain or even just get rid of pressure that's time to remove switch.
It's threaded 1/4 bsp so you just need a 1/4 plug.
It's two screws lol
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
