Heating programmer problem

Joined
12 Apr 2008
Messages
15
Reaction score
0
Location
Surrey
Country
United Kingdom
my boiler programmer central heating is switched to off but my rads are still warm. could this be the valve has stuck open ? or is there any other solutions
 
If you have a zone valve then it sounds like its letting by or jammed open !!
 
the return could be pulling the heat into the system!!

Is there a gate valve on the return pipe of the cylinder??
 
Yeah on the side of that tank are 2 pipes , 1 above the other about 9 inches.. the bottom 1 is the return,, youll know coz they are hot,,, on the return 1 there may be a valve used to slow the return flow of water.. if its there then shut it down then open it only a few turns
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top