The white plastic condensate trap on the C24 Capriz model has three horizontal ports on the top half
and one vertical port on the lower half, which screws out.
The lower port i assume is for venting to drain.
One of the ports on the top half has a black rubber hose connects which comes from the top of combustion chamber,
but at 90 degrees to this port are a further two ports, the upper of these having a blue plug in it.
Can anyone kindly explain the purpose of these two ports extra please.
Before anyone comments, i am not touching the gas and flue, that is being left to a Corgi engineer.
Thanks
and one vertical port on the lower half, which screws out.
The lower port i assume is for venting to drain.
One of the ports on the top half has a black rubber hose connects which comes from the top of combustion chamber,
but at 90 degrees to this port are a further two ports, the upper of these having a blue plug in it.
Can anyone kindly explain the purpose of these two ports extra please.
Before anyone comments, i am not touching the gas and flue, that is being left to a Corgi engineer.
Thanks