Burner runs for 15 seconds approx and cuts out. I’ve removed the photo cell and checked for resistance changes in different light conditions. All seems good with this.
I then removed the control box, it look likes something in here has given up as there’s signs of burning (explains why the 3amp fuse popped)
Is it likely the control box has just failed with old age or likely that something has taken the box out.
Boiler lights no issue and runs fine for 15seconds then straight to lockout.
I then removed the control box, it look likes something in here has given up as there’s signs of burning (explains why the 3amp fuse popped)
Is it likely the control box has just failed with old age or likely that something has taken the box out.
Boiler lights no issue and runs fine for 15seconds then straight to lockout.
