I recently engaged an electrician to upgrade my consumer unit, the whole house was tested and found to be correct and I am awaiting the Safety Certificate.
I then decided to change all my lights to LEDs and ordered some lamp holders, next I (stupidly) removed the kitchen and hall light fittings, taking no note of the connections or photographing anything.
The new lights arrived and I fitted a new lamp holder in the kitchen and a Radar LED ceiling light in the entrance hall.
When the power was reconnected the Radar light came on for a couple of mins then flickered and went off.
The kitchen light I was unable to test as I had no suitable bulbs, so I rigged up a bulb holder on suitable flex to check and the light and switch worked perfectly.
BUT
The Radar light in the hall will not operate nor will any of the other lights on the ground floor.
I have tested the ceiling rose in the entrance hall and there is no power.
Does anyone have any suggestions what the problem may/could be or what tests I can carry out to access the extent of the problem.
I have a Fluke AC multimeter and Einhell digital detector and a full range of tools.
I then decided to change all my lights to LEDs and ordered some lamp holders, next I (stupidly) removed the kitchen and hall light fittings, taking no note of the connections or photographing anything.
The new lights arrived and I fitted a new lamp holder in the kitchen and a Radar LED ceiling light in the entrance hall.
When the power was reconnected the Radar light came on for a couple of mins then flickered and went off.
The kitchen light I was unable to test as I had no suitable bulbs, so I rigged up a bulb holder on suitable flex to check and the light and switch worked perfectly.
BUT
The Radar light in the hall will not operate nor will any of the other lights on the ground floor.
I have tested the ceiling rose in the entrance hall and there is no power.
Does anyone have any suggestions what the problem may/could be or what tests I can carry out to access the extent of the problem.
I have a Fluke AC multimeter and Einhell digital detector and a full range of tools.