help please: how to join 2 laminate panels together? :)

[jarthel]

Hello

I have 2 rectangular laminate panels that I want to join together to make a bigger rectangle. It'll be the door to my cabinet.

I've read this guide: //www.diynot.com/pages/ww/ww017.php#a2. But I'm unsure how to go about it? can you please explain? maybe a simple illustration?

thank you very much for the help

 

[big-all]

what size are you talking about[thickness length and breadth]
are you talking 15mm conti board without a frame with a frame
or are you trying butt join side to side

 

[jarthel]

or are you trying butt join side to side

this one. thank you

 

[big-all]

or are you trying butt join side to side

this one. thank you

ok you havent answerd my question on material size or if a frames required so i will assume its a normal kitcken cabinet door size
//www.diynot.com/forums/viewtopic.php?p=1451615#1451615
so all you will need is 2 mending plates
http://www.toolstation.com/documents/search/index.html?searchstr=mending+plates&submit=Go

as each part will have 2 or 3 hinges they only need holding to the same arc

any other solution will require an expenditure of between £15 to£60 on the basics to allow using buiscuts or dowels

 

[jarthel]

It seems the material is made of MDF. and no frames are required.

thanks big-all!