Hiya All
Right. I've just moved into a new house and I'm really stuck with how my system works.
I have the following.
An Ideal Icos HE24 boiler.
OSO (Unvented) Indirect 20RI pressurised tank.
A big red round vessell thingy.
Loads of pipes
and a WILO Gold RS60 pump.
What I don't understand is that even with the CH and HW off. There is a noise coming from the airing cupboard that can only be described as fan vent type of sound. But there is no vent there. I think the noise is coming from the pump. But why would the pump be operating even if the CH is off. If it's supposed to do this then surely it's going to cost a fortune in elecy bills.
Also the pump gets red hot. I haven't tried touching it when the whole system should be off.
Also. With the hot water. Any tips on how long it should be on during the day. Reading on the interweb the tank will re-heat itself completly in 30 mins flat, but it doesn't tell me how long it will keep the water hot for with the immersion off.
Thanks in advance for any advice.
Kevin
Right. I've just moved into a new house and I'm really stuck with how my system works.
I have the following.
An Ideal Icos HE24 boiler.
OSO (Unvented) Indirect 20RI pressurised tank.
A big red round vessell thingy.
Loads of pipes
What I don't understand is that even with the CH and HW off. There is a noise coming from the airing cupboard that can only be described as fan vent type of sound. But there is no vent there. I think the noise is coming from the pump. But why would the pump be operating even if the CH is off. If it's supposed to do this then surely it's going to cost a fortune in elecy bills.
Also the pump gets red hot. I haven't tried touching it when the whole system should be off.
Also. With the hot water. Any tips on how long it should be on during the day. Reading on the interweb the tank will re-heat itself completly in 30 mins flat, but it doesn't tell me how long it will keep the water hot for with the immersion off.
Thanks in advance for any advice.
Kevin
