Help with a paxton net2 classic system please

[markymark2406]

I have just stripped out the above and want to install in on my outside side gates.

What i have is the net 2 module a net 2 key pad and 2 mag locks, im a bit confused with the wiring as i believe i need to use resisters on the network cable cat5 and im not sure how i wire the mag locks.

I have downloaded the programme and know how to default the system.

 

[EightyTwo]

120 ohm terminating resistors at each end of the data bus (although it may work without them).

Lock cable goes through green break glass and back to the ACU. Connect the -ve to the -ve of the supply and the +ve to the NC relay terminal. Connect the common relay terminal to the +ve of the supply.