help with bathroom window

Joined
18 Feb 2006
Messages
1,669
Reaction score
20
Location
Birmingham
Country
United Kingdom
We have 2 windows in the bathroom, the main one and a small one from the old wc which was knocked into one.

Fitted new windows (about a year ago) all round and now putting in shower cubicle and it will go where the small window is.

Now would it be ok to tile around it all and leave the window there, or should I brick it up? The window is about 1' x 2'. Its very new and cost a fair bit.

Would like some opinions from others

Thanks
 
Even if its got frosted glass and you or yor misses were taking a shower at night with the light on someone could get an eye full
Leave it in but stud it out, board it over, and tile it
cheap and easy solution!!!
 
i would do away with it altogether inside and out by bricking the outside and what ever you have inside.
leaving it in and boarding over inside and covering with tiles can cause condensation
 
Have seen a shower like this fitted over a window that was half filled in with glass bricks up to the edge of the shower enclosure, still letting in light but keeping water in the shower...
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top