Hikvision Wiring...

[Pufftmw]

OK, as part of a job lot, I have acquired a couple of Hikvision DS-CD273F-I cameras. Unfortunately they were ripped out of a shop refurbishment and when I say ripped, someone cut off the RJ45 female connectors when removing them...

So I have a lot of coloured wires, fortunately enough length to add to a connection block of some sort but no idea what colour is for what - standard cat5/6 colours they are not! Does anyone know or have a guide to the colors and what they should be connected to please?

 

[secureiam]

never taken one apart, best thing is to open one up and have a look at what is going where to stand a fighting chance.

or find somewhere that repairs them possibly, hopefully they were down powered before being cut.

don't know what they have inside and whether each production line is standardised.

 

[rsgaz]

Any use...

http://www.hikvision.com/us/Press-Release-details_10643_i3083.html

Just be careful, they are numbering the pins in the opposite order to a standard RJ45.

 

[Pufftmw]

Looks the job, thank you. As long as I match wires to the correct ethernet wire, then should be ok!

 

[rsgaz]

As long as I match wires to the correct ethernet wire

Yep, make sure you copy them to T568B on that PDF, and not T568A.