Hive combi thermostat V4 wiring

[shaun.fielding@virgi]

Bought a Hive combi V4 but need advice on wiring it up

Currently I have a Center wireless stat fitted

N - neutral from fused spur
L - live from fused spur
L - live to boiler

A and B heating control wires from boiler

Images attached

**Am I being a div and it's as simple as

Neutral wire to neutral
Both live wires to live
Grey wire to common
Black wire to position 3

 

[Johnmdc]

Yes it really is that simple.

 

[shaun.fielding@virgi]

I thought so. Thanks

 

[shaun.fielding@virgi]

Update: it was that easy

 

[CountryFan]

Update: it was that easy

Yet, some make it hard. Well done you.

 

[shaun.fielding@virgi]

The hardest part was mounting it onto a 47mm back box (with the help of some spacers)

The initial installation had the center WiFi controller directly above the fused on/off mains switch for the boiler. The back box was needed for clearance to access the two retaining screws on the bottom of the hive receiver.

 

[mack625]

I have a HIve V4 and want to install the Receiver on a Worcester Bosch Greenstar R30 HE (2005)

Is this the correct wiring diagram for it ?
Thank you

 

[CountryFan]

It looks like it yes.