- Joined
- 7 Feb 2018
- Messages
- 2
- Reaction score
- 0
- Country
Hi all
Im after a little advise please. i have just ordered a new Hive heating and hot water kit. and i currently have a Drayton LP522 timer and by the look of things this will just unclip and a straight fit with Hive.
My question is i have seen on videos that i need to remove and join the wires from my old room stat. but which wires do i join. i have 4 wire holes (off, on, Com, N) but only 3 used. "On" is a yellow wire, "Com" is a red wire & "N" is a blue wire.
Hope this makes sense.
Regards
pat
Im after a little advise please. i have just ordered a new Hive heating and hot water kit. and i currently have a Drayton LP522 timer and by the look of things this will just unclip and a straight fit with Hive.
My question is i have seen on videos that i need to remove and join the wires from my old room stat. but which wires do i join. i have 4 wire holes (off, on, Com, N) but only 3 used. "On" is a yellow wire, "Com" is a red wire & "N" is a blue wire.
Hope this makes sense.
Regards
pat
