Hive Wiring Help

[captgadget]

Evening all

I have the Hive thermostat on order and should be here tomorrow.

I currently have a Salus RT300RF wireless thermostat which i will be replacing.

The boiler is a viessmann vitopend 100 combi

The current wiring on the Salus receiver is:-

COM - Grey wire and brown loop
NO - Black wire
N - Blue wire
L - Brown loop from COM

Am i correct in thinking the wiring on the Hive single channel receiver will be as follows:-

N = Blue wire
L = Brown loop
1 = Grey wire and brown loop
3 = Black wire

any help and info will be much appreciated.

Thanks in advance.

 

[stem]

Yes. All of the wires (including the loop) in the Salus N, L , COM and NO terminals go to the terminals marked exactly the same at the Hive.

 

[captgadget]

Perfect. Thanks for your help stem.

Hopefully will have this hooked up over the weekend.

 

[captgadget]

Fitted it today and works flawlessly. Thanks again stem