- Joined
- 10 Jan 2019
- Messages
- 2
- Reaction score
- 0
- Country
Hi Guys looking for a few pointers.
I have a danfoss TP4000 that's battery powered but has 3 core and earth to it. Only 2 cores are used in the Com and NO terminals and the 3rd core is just spare. The spare goes back the the Load Neutral on the fused spur.
Do I use the Spare as my perm Neutral, the Com as my common and Perm live (linked) and then the NO wire as is? Iv added the current wiring diagram and what I think is correct for hive.
Thanks
I have a danfoss TP4000 that's battery powered but has 3 core and earth to it. Only 2 cores are used in the Com and NO terminals and the 3rd core is just spare. The spare goes back the the Load Neutral on the fused spur.
Do I use the Spare as my perm Neutral, the Com as my common and Perm live (linked) and then the NO wire as is? Iv added the current wiring diagram and what I think is correct for hive.
Thanks
