HIVE Single channel receiver issues on install

[Gibson710]

Hi,

I'm in need of some help.

I have been trawling the forum to find some solutions and have tried what has been suggested but still no luck.

I have an Ideal Logic ESP1 35 and Danfoss TP4000 thermostat/programmer

I have removed the Danfoss and have wired the Common into 1 and the NO into 3 on the hive back plate. When I turn power back on there is no Status Light flashing.

Am I right in thinking that I don't need to use the perm live and perm neutral as single channel?

Thanks in advance for any help!

 

[ianmcd]

Nope you have to put a live and neutral in to power the receiver and then use 1&3 as com and switched live from the boiler