Hivev3 wiring help replacing siemens rcr10

[richardbirkett]

Hi I am currently fitting a hive v3 thermostat but replacing a siemens rcr10 can any one help with wiring the only issue i will have is that the siemens has a wire on l2 and help would be grateful so it has wires in L N L1 LX AND L2 see pic

 

[Johnmdc]

It's unusual to have the wire on L2. But not a problem with the Hive receiver.
L to L
N to N
LX to 1
L2 to 2
L1 to 3
This is assuming that it is a single channel Hive that you have got.

 

[richardbirkett]

It's is thank you for your help I will let you know if it works much appreciated

 

[ianmcd]

that is possibly the worst wiring I have ever seen, what a disgrace

 

[Deleted member 267285]

It's unusual to have the wire on L2. But not a problem with the Hive receiver.
L to L
N to N
LX to 1
L2 to 2
L1 to 3
This is assuming that it is a single channel Hive that you have got.

Looks like the L is joined to Lx, so would possibly need a link on Hive? @richardbirkett what Hive do you have and what boiler?

 

[richardbirkett]

Yeah I seen that thanks

 

[Deleted member 267285]

Yeah I seen that thanks

Ok, so can you answer my questions then?

 

[richardbirkett]

sorry what was your question

 

[richardbirkett]

hive v3 and its a Worcester boiler with siemens rcr10 fitted

 

[Deleted member 267285]

hive v3 and its a Worcester boiler with siemens rcr10 fitted

Ok, I would put the link in, as we don’t know which type of Worcester, but existing receiver works.