Could any body offer me some advice about the sort of hot water pressure I should be expecting?
I have a ferroli condensing combi boiler about a year old.
The cold mains supply is approximately 12 litres a minute, the hot water comes out about 5-6 litres a minute.
In the boiler spec it gives the hot water rates as follows:
Hot tap water supply change 25 degrees - 13.8 l/min
Hot tap water supply change 30 degrees - 11.5 l/min
Hot tap water supply change 35 degrees - 9.8 l/min
I dont have the temperaure up very high!
I've turned the boiler off and still only get 5-6 litres a minute cold water through the hot tap!
Is this normal, or does it sound like a poor flow to the boiler?
I have a ferroli condensing combi boiler about a year old.
The cold mains supply is approximately 12 litres a minute, the hot water comes out about 5-6 litres a minute.
In the boiler spec it gives the hot water rates as follows:
Hot tap water supply change 25 degrees - 13.8 l/min
Hot tap water supply change 30 degrees - 11.5 l/min
Hot tap water supply change 35 degrees - 9.8 l/min
I dont have the temperaure up very high!
I've turned the boiler off and still only get 5-6 litres a minute cold water through the hot tap!
Is this normal, or does it sound like a poor flow to the boiler?