The Washer has sprung a leak, I think I have traced the problem.
Where the inlet pipe goes in to the dispenser, there are two water valves one has popped off, I tried to put it back on but it pops off again as soon as the water pressure is applied by turning the water back on.
There is no other evidence of the valve locking on, just of forceful push.
The second valve which is still in place, looks the same but is staying put.
Is it knackered and needs replacing or am I doing something wrong?
It looks a bit like this, but slightly different.
http://www.hotpointparts4u.co.uk/index.php?_a=viewProd&productId=319
Where the inlet pipe goes in to the dispenser, there are two water valves one has popped off, I tried to put it back on but it pops off again as soon as the water pressure is applied by turning the water back on.
There is no other evidence of the valve locking on, just of forceful push.
The second valve which is still in place, looks the same but is staying put.
Is it knackered and needs replacing or am I doing something wrong?
It looks a bit like this, but slightly different.
http://www.hotpointparts4u.co.uk/index.php?_a=viewProd&productId=319