How can I add a drawer to a 'non drawer' base unit

Joined
13 Feb 2006
Messages
241
Reaction score
3
Location
Tyne and Wear
Country
United Kingdom
We recently bought new kitchen units, which we had fitted but unfortunately none came with drawers. (obviously, we never thought about it at the time and just ordered plain base units)

We'll manage to store most things without any problems, but really it would be nice to have at least one drawer, even if it was only for the cutlery.

What options are there to perhaps add a drawer, fitted to the underside of the worktop (perhaps) or is there a better idea.

My suggestion to just leave the knives and forks in the dishwasher wasn't accepted .. anyway, we have more than 3 of each :)

thanks !
 
Sponsored Links
You can buy drawers, metal are best, with runners - ebay, but you would need to find a source for the drawer fronts to match you existing. Four standard ones will fill a unit with drawers. We have eight (2x 4 sets).
 
Can you get new doors and drawer fronts to match?
Sadly not .. they were on an 'end of line' sale

I was thinking like a drawer attached to the underside of the worktop, which when closed would lie behind the normal door, just not sure if this type of thing is available
 
Sponsored Links
we have drawers behind a normal full height base unit door, part of our Wickes kitchen setup.
So you open the door and then see the drawers - I deep one for Veg, and 2 smaller ones , not as small as cutlery draws
here is just an example of it -
https://www.drawerboxes.co.uk/PBSCProduct.asp?ItmID=30835955&AccID=104018&PGFLngID=1&gclid=Cj0KCQiAosmPBhCPARIsAHOen-OUUXqOGd8jlEYj-MixJdw08eCPrEjmwEJqYd1QDymbCL7-A800-FIaAkD8EALw_wcB
so you can see its possible - just a case of getting the drawers themselves
https://www.drawerboxes.co.uk/blum-tandembox-internal-kitchen-drawers-c102x2276411
Wire baskets , which you could add a cutlery insert to
https://www.bullerltd.co.uk/solid-base-soft-close-pull-out-wire-basket.html

not sure if IKEA sell internal drawers , maybe worth looking in places like B&Q, Wickes, homebase etc as they sell a lot of the kit flat packed on its own.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top