- Joined
- 5 Dec 2012
- Messages
- 927
- Reaction score
- 13
- Country
I'm doing my bathroom and I am going to be boarding onto the brick wall and skimming over the board. I am installing a wall hung basin which will obviously be above the pipework (see image below), which runs vertically up the wall from the floor.
Picture or pipework above
I am going to be boxing in the pipework but I'm getting stuck on where to put the batons to fit the plywood to. My understanding is this:
- Put one baton to the left and one to the right of the pipework in a vertical direction as the pipework.
Put one baton on the floor in a horizontal direction to the width of the boxing required.
Now the bit i am stumped on is fitting the vertical batons as to where the plywood will be joining each other at the corners. How do I fit this vertical baton (where the join is)? There is no way that I can fit this vertical baton to the floor, as the other vertical ones have the wall to secure to.
Many thanks
Mark