- Joined
- 21 Sep 2025
- Messages
- 1
- Reaction score
- 0
- Country
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
How to change Danfoss RX1 5 core to Honeywell Home T3R
- Thread starter wirralwave
- Start date
The connections for the Honeywell are shown in your photo, and the connections for the Danfoss are usually on the back of it. I think yours will be as below. If it is the same....
....the wires are moved from the Danfoss terminals to the Honeywell terminals that have the same function, like for like.
DF N = HW N
DF L = HW L (Both HW L's are connected together internally so are effectively are the same terminal)
DF 2 = HW A
DF 3 = HW B
Not sure why there is a wire in DF terminal 4, that isn't normally used, but the equivalent terminals are
DF 4 = HW C
....the wires are moved from the Danfoss terminals to the Honeywell terminals that have the same function, like for like.
DF N = HW N
DF L = HW L (Both HW L's are connected together internally so are effectively are the same terminal)
DF 2 = HW A
DF 3 = HW B
Not sure why there is a wire in DF terminal 4, that isn't normally used, but the equivalent terminals are
DF 4 = HW C
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local