How to cut small channel in tarmac drive

Joined
3 Mar 2005
Messages
788
Reaction score
57
Location
Surrey
Country
United Kingdom
My son just got a house and there is water running in under the garage door. The previous owner had the drive tarmacked. There is a good slope away from the garage as the site is on a slight hill. But near the front of the garage the tarmac is slightly higher than the garage so about 6 inches of it drains into the garage. How can i cut into the tarmac to create one or two drain channells about 12 inches long and 3 inches wide.
Hammer and bolster ? Or blowlamp and scraper ?
 
Sponsored Links
9" angle grinder with diamond blade would be my guess to cut a neat line, then chip it out with a kango
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top