Well, he asked and I replied.
Maybe a very optimistic diyer, I have seen many in my days using tools in a way that only pure luck saved them.
How to trim a door jamb along its internal edge? Door won't close properly
- Thread starter potato80
- Start date
Maybe a very optimistic diyer, I have seen many in my days using tools in a way that only pure luck saved them.
Sponsored Links
If you're so experienced, why didn't you take the door off and do the job without messing about?
Sponsored Links
further general comments
if its the original door or a properly fitted correct sized door the only material you should be removing is paint and only paint if you reach bare wood and theres no paint to remove on the matching surface then something is wrong if you dont have a door stop and the frame is plumb and square then the door is wrong
you should never ever adapt a correct door frame to a door as the next door will not fit
if its the original door or a properly fitted correct sized door the only material you should be removing is paint and only paint if you reach bare wood and theres no paint to remove on the matching surface then something is wrong if you dont have a door stop and the frame is plumb and square then the door is wrong
you should never ever adapt a correct door frame to a door as the next door will not fit
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
