Hello All,
Currently the consumer unit and double socket are on the end wall in my detached garage. I'd like to move the socket to the middle of the garage and install another on the opposite wall. So two sockets opposite each other about 3m from CU.
How would you do it?
Option 1: wire in the first socket and put the other in series with the cable over the joists.
Option 2: use a junction box above CU to split the supply.
Option 3: Put another 2.5mm cable into the CU using the same terminals as the other socket.
I use power tools in my garage. The biggest is a 2kW grinder.
CU:
CU from above
Thanks.
Currently the consumer unit and double socket are on the end wall in my detached garage. I'd like to move the socket to the middle of the garage and install another on the opposite wall. So two sockets opposite each other about 3m from CU.
How would you do it?
Option 1: wire in the first socket and put the other in series with the cable over the joists.
Option 2: use a junction box above CU to split the supply.
Option 3: Put another 2.5mm cable into the CU using the same terminals as the other socket.
I use power tools in my garage. The biggest is a 2kW grinder.
CU:
CU from above
Thanks.