I cut the waste pipe short , what do I do.

[Yanni]

I seem to have cut the 32mm basin waste pipe too short. Is there anything I can do to extend it by 22mm?

I tried two different traps and they do not fit now I used a p-trap with an extension but the extension now is too long.

The bottle trap was ok before I cut the pipe by a bit but now the in and out depth is out.

How do you extend the pipe by only a bit.

 

[Yanni]

I guess I can cut the pipe shorter and use one of these But does anyone do a compression 32mm to a blank 32mm pipe coupling ? So compression on one side and pipe looking on the other. Something like the Floplast but no bent , straight instead.

 

[kidgreen61]

That's awkward, I presume you can't just replace short piece?
Is there room to insert a coupler, and a short piece of pipe?
Maybe try and search for a M/F coupler equal sizes fit trap onto male end.

 

[johnny2007]

Either cut the pipe even shorter, then use solvent weld coupler and another bit of pipe...
Or...
Cut another bit of the pipe, get this and cut to size...

Multifit Adjustable Straight Connector

mcalpineplumbing.com

 

[Yanni]

Thank you both, you got me in the right direction I think I might try this one :