- Joined
- 13 Aug 2007
- Messages
- 11
- Reaction score
- 0
- Country
hi , i have posted elsewhwere but i have not had much joy, so i thought i would try here.
I have made some built in wardrobes using 18mm thick birch ply, i made the carcasses, then fixed the carcases to each other and the wall, i then fixed the shelves support battens and put the shelves in place. The problem is 3 of the shelves have a gap between the edge of the shelve and the carcass.
What would be best to conceal the gap
Would a wood filler be ok
Or what do you pros use to get the best results
thanks
I have made some built in wardrobes using 18mm thick birch ply, i made the carcasses, then fixed the carcases to each other and the wall, i then fixed the shelves support battens and put the shelves in place. The problem is 3 of the shelves have a gap between the edge of the shelve and the carcass.
What would be best to conceal the gap
Would a wood filler be ok
Or what do you pros use to get the best results
thanks