- Joined
- 27 Jan 2008
- Messages
- 28,388
- Reaction score
- 3,452
- Location
- Llanfair Caereinion, Nr Welshpool
- Country
I looked at my software and noted a high load.
The 3313 watt load seems around 3000 watt too high, but before I could check the immersion heater load had dropped. This 
does not seem long enough to be the immersion heater. Second spike wife was out, so nothing she has done, the first peak 
seems to follow the solar production, so that would seem to tie in with iboost+ but I can't think of anything other than the iboost+ that could use 3 kW, but the time seems too short.
The 3313 watt load seems around 3000 watt too high, but before I could check the immersion heater load had dropped. This does not seem long enough to be the immersion heater. Second spike wife was out, so nothing she has done, the first peak seems to follow the solar production, so that would seem to tie in with iboost+ but I can't think of anything other than the iboost+ that could use 3 kW, but the time seems too short.
