Ideal Mini HE C24

[Paulgw]

Hi there.I have the above boiler.
When Central heating is on hot water almost instant.
If heating not on it can take up to two minutes to get hot water.
Any ideas ?

Also anyone recommend a suitable external thermostat controller for this boiler.

Thanks

Paul

 

[Agile]

When CH is being used the boiler is already warm so very fast hot water.

From cold it should not be taking more than about 20-30 seconds to be pretty hot.

I suspect the flow switch is not being fully activated on HW only.

You may need a boiler engineer to repair it for you.

Any stat with two volt free contacts will be fine as long as its correctly connected.

Tony

 

[Agile]

Oops

Tony