Simple all-electric vented system in small flat. Immersion thermostat cut-out kept tripping, a special nuisance as the flat has a tenant. Plumber changed the stat but it didn't fix the problem. Here's the twist: Plumbing was about 40 years old and probably furred up so we replaced the ENTIRE SYSTEM - cylinder (stainless), immersion element, stat and time switch - and it still trips! Any ideas?
Immersion cut-out with a twist
- Thread starter niceboy
- Start date
- Joined
- 17 Mar 2011
- Messages
- 181
- Reaction score
- 37
- Country
new house ?
Get a competent spark to investigate
No, '70s build block of flats. Say no more.
These hybrid plumbing/ electric problems seem to suffer from jobsworth syndrome. I've had one plumber saying it's obviously electrical - not my department - and sparks saying it's probably the tank not filling - not my department. Isn't there ANY old-fashioned plumber/electrician who knows both subjects inside out, or are they all too bogged down with the latest "editions" of their specialist subject?
- Joined
- 5 Nov 2024
- Messages
- 4,166
- Reaction score
- 2,095
- Country
What exactly is tripping? Did you renew the immersion wiring or at least check it out? Maybe get someone capable of both?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
